Dbfilt Modify - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Command
Function
Command Format
Parameter
Description
26 Confidential and Proprietary Information of ZTE CORPORATION

dbfilt modify

This command is used to modify one packet capture rule.
dbfilt modify id
<string1> smac <macaddress1> dmac <macaddress2> l2proto
<arp|ip|number3>[sip1
dip1 <ipaddress3> dip2 <ipaddress4> ipproto <tcp|udp|icmp
|number3> sport1 <port1> sport2 <port2> dport1 <port3>
dport2 <port4>[type1 <port5> type2 <port6>]]
Parameter
modify
id
<number1>
maxlen
<number2>
dev
<string1>
smac
<macaddress1>
dmac
<macaddress2>
l2proto
arp|ip|number3
sip1
<ipaddress1>
sip2
<ipaddress2>
dip1
<ipaddress3>
dip2
<number1> maxlen
<ipaddress1>
Description
This modifies one packet capture rule.
This specifies the ID of rule to be modified.
This is one number, indicating ID of packet
capture rule.
This modifies packet length.
This is one number, which is packet length.
This modifies the interface that captures
packet.
This is one string, indicating interface name.
This modifies source MAC address of packet.
This is one string, indicating MAC address, in
format of 00:00:00:00:00:00.
This modifies destination MAC address of
packet.
This is one string, indicating MAC address, in
format of 00:00:00:00:00:00.
This specifies the type of protocol to be L2
protocol.
When setting IP type for user, it also needs
to set source/destination IP and other data
of packet.
This modifies the start address of packet
souce IP.
This is one string, indicating IP address, in
format of A.B.C.D.
This modifies the end address of packet souce
IP.
This is one string, indicating IP address, in
format of A.B.C.D.
This modifies the start address of packet
destination IP.
This is one string, indicating IP address, in
format of A.B.C.D.
This modifies the end address of packet
destination IP.
<number2> dev
sip2 <ipaddress2>