ZXR10 8900 Series Command Manual (FW Volume)
Parameter
Description
Command
Illustration
Example
Command
Function
Command Format
Parameter
Description
Example
Command
Function
Command Format
Parameter
Description
Example
50
Confidential and Proprietary Information of ZTE CORPORATION
Parameter
delete
id
<number>
name
<string>
To delete one cycle, it is available to delete the cycle according to
cycle name, cycle id or both. However, in case cycle id and cycle
name are inconsistent, cycle name shall apply.
When no parameter is given, the cycle not quoted by policy is
deleted.
To delete week1, execute the following command:
# schedule delete name week1
schedule clean
This command is used to delete all schedules not quoted by policy.
schedule clean [cyctype <yearcyc|weekcyc>]
Parameter
yearcyc|weekcyc
To clear all unquoted year cycles in FW system, execute the fol-
lowing command:
# schedule clean cyctype yearcyc
schedule show
This command is used to show all cycles.
schedule show [cyctype <yearcyc|weekcyc>]
Parameter
yearcyc|weekcyc
To view week cycle on FW, execute the following command:
# schedule show cyctype weekcyc
Description
This deletes one cycle.
This specifies ID of the cycle to be deleted.
This is one number, indicating ID of cycle.
This specifies the name of cycle to be deleted.
This is one string, indicating name of cycle.
Description
Weekcyc indicates week cycle and yearcyc
indicates year cycle.
Description
Weekcyc indicates week cycle and yearcyc
indicates year cycle.