Session Timeout Udp; Session Timeout Default; Session Protocol - Zte ZXR10 8900 Series Command Manual

Command
Function
Command Format
Parameter
Description
Example
Command
Function
Command Format
Example
Command
Function
Command Format
Parameter
Description
Command
Illustration

session timeout udp

This command is used to set UDP session timeout.
session timeout udp <number|default>
Parameter
number
default
To set UDP session timeout to default value 60 seconds, execute
the following command:
# session timeout udp default
To set UDP session timeout to 200 seconds, execute the following
command:
# session timeout udp 200

session timeout default

This command is used to set all sessions to default values.
session timeout default
To set all related sessions to default value, execute the following
command:
# session timeout default

session protocol

This command is used to set to establish sessions for which non-
default protocols.
session protocol <add <number>|default>
Parameter
number
default
In default cases, FW system only supports to establish TCP, UDP,
ICMP and GRE sessions. When more IP protocols need to be sup-
ported, this command can be used.
To show protocol id, execute the following command: #define
service show default.
Confidential and Proprietary Information of ZTE CORPORATION
Description
This is one number, ranging from 10 to 7200.
This sets default timeout.
Description
This set protocol number, in range of 0-255.
This indicates default setting, that is to
establish sessions only for TCP, UDP, ICMP
and GRE packets.
Chapter 10 network
111