Idsserver; Idsserver Add; Idsserver Modify - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Parameter
Description
Example
Command
Function
Command Format
Parameter
Description
Command
Illustration
Example
Command
Function
Command Format
118 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
<number>
To delete one IDBP rule whose ID is 2, execute the following com-
mand:
# idbprule delete id 2

idsserver

This set of commands is used to set IDS interaction rule-related
parameters. FW can realize interaction with intrusion detection
system of other manufacturers and provides comprehensive and
efficient security protection to user intranet.

idsserver add

This command is used to add one IDS interaction rule.
idsserver add ip <ipaddress> key <string>
Parameter
<ipaddress>
<string>
1. Shared key of FW and interacted IDS device is set manually. If
the key of interacted IDS device is generated automatically by
system , user needs to give the configuration on WEBUI inter-
face. For details, please refer to related part in User Manual.
2. To realize interaction between FW and IDS device, it needs to
enable tosids service in corresponding area. For details, please
refer to section pf-service.
To add server 192.168.1.21, execute the following command:
idsserver add ip 192.168.1.21 key topsec

idsserver modify

This command is used to modify one IDS interaction rule.
idsserver modify id<number><[ip <ipaddress>][key <string
>]>
Description
This is one IDBP rule id.
Description
This is IP address string, in format of A.B.C.D.
This is one string, setting shared key with
IDS device.