Usermaxlogin Set Maxnum; Usermaxlogin Show; Config; Config Implement - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Command
Function
Command Format
Parameter
Description
Example
Command
Function
Command Format
Example
Command
Function
Command Format
Parameter
Description
Command
Illustration
146 Confidential and Proprietary Information of ZTE CORPORATION

usermaxlogin set maxnum

This command is used to set the max login number for the same
one user.
usermaxlogin set maxnum <number>
Parameter
<number>
To set the max login number for the same one user to 4, execute
the following command:
# usermaxlogin set maxnum 4

usermaxlogin show

This command is used to show the max concurrent login user num-
ber set on system.
usermaxlogin show
To show the max concurrent login user number set on system,
execute the following command:
# usermaxlogin show The max location of user is:4

config

This set of commands is used to manage system configuration.

config implement

This command is used to validate the configurations newly added
to system.
config implement [vsid <number>]
Parameter
vsid <number>
With this command, the newly added configurations get valid on
device immediately but they are not saved. To apply these con-
figurations next time when enabling FW, it is needed to save con-
figurations.
Description
This is the max login number for the same
one user, in range of 1-2000.
Description
This is optional, specifying ID of virtual
system, 0 by default, in range of 0-254.