Policy (Nat); Policy Add - Zte ZXR10 8900 Series Command Manual

Command
Function
Command Format
Parameter
Description
9
C h a p t e r

policy (nat)

Table of Contents:
policy add.........................................................................95
policy modify ....................................................................99
policy delete ................................................................... 102
policy show..................................................................... 103
policy clean .................................................................... 103
policy move .................................................................... 103

policy add

This command is used to add one NAT policy.
policy add [srcarea
nam>][srcvlan
ig_src <src_addr1>][orig_dst
<sport_id>][orig_service <ser_id>][trans_src < src_addr2
>][trans_dst <dst_addr2>][trans_service
<yes|no>][enable <yes|no>][before <number>]
Parameter
add
srcarea
<srcarea_nam>
dstarea
Confidential and Proprietary Information of ZTE CORPORATION
<srcarea_nam>][dstarea
<srcvlan_no>][dstvlan
Description
Adding NAT policy.
This sets source area.
This is one string and source area resource
name is input here.
Tips:
This parameter value must be predefined
area name. One ore more area names can be
input here. As for multiple area names, space
is used between each two area names and all
area names are quoted with single quotes,
such as 'area1 area2'.
This sets destination area.
<dstarea_
<dstvlan_no>][or
<dst_addr1>][orig_sport
<ser_obj>][pat
95