Usergroup Adduser - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Parameter
Description
Command
Illustration
Example
Command
Function
16 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
addgroup
group_name
<string1>
server_name
<string2>
name(list)
<username>
By setting authenticated user group, it is available to conduct ac-
cess perform access control to authenticated user. Users that don't
belong to any user group will fail to pass authentication.
To add one user group with the name of user group to be test,
authentication server used by user group to be RADIUS, members
in user group to be users aaa and bbb on RADIUS server, execute
the following command:
# usergroup addgroup group_name test server_name
RADIUS name(list) 'aaa bbb'
To add one user group with the name of user group to be test0,
authentication server used by user group to be RADIUS, members
in user group to be all users on RADIUS server, execute the fol-
lowing command:
# usergroup addgroup group_name test0 server_name RADIUS

usergroup adduser

This command is used to add user to existing authenticated user
group.
Description
This adds authenticated user group.
This sets name of user group.
This is one string, which is the name of newly
added user group.
This specifies the name of server that this
user group belongs to.
This is one string, which is the name of server
that this user group belongs to.
Tip:
This parameter must be name of predefined
authentication server.
This specifies the list of users in this user
group: All Users or Specified User on this
server.
This is one string, which shows users
contained in user group.
Tips:
1. To specify single user, just input user
name directly or quote the username
with single quotes, Such as test1 or
'test1'.
2. As for multiple users, space is used
between each two usernames and all
usernames must be quoted with single
quotes, such as 'test1 test2'.
3. As for all users, this parameter is not
specified.