Traffic; Traffic Statistic - Zte ZXR10 8900 Series Command Manual

Parameter
Description
Parameter
search
daddr
<string>
dport
<number>
flags
on|off
from
<number>
num
<number>
protocol
<number>
tcp|udp|icmp
saddr
<string>
sport
<number>
vsid
<number>

traffic

This set of commands is used to show traffics on all interfaces.

traffic statistic

This command is used to show traffics on all interfaces.
Command
Function
Description
This command is used to show IP connection
information.
This is optional and can be viewed according
to destination IP adders of connection.
This is one IP address string.
This is optional and can be viewed according
to destination port.
This is one number, ranging from 1 to 65535.
This is optional, indicating wether to show
internal flag, not show by default.
Yes/No
This is optional. It specifies from which
connection to show. It shows connections
from the first one by default.
This is one number.
This is optional, showing the number of
connections to be shown, max 8000, 20 by
default.
This is one number, max 8000.
This is optional, setting protocol type.
This is one number, ranging from 1 to 255.
This selects protocol type.
This is optional, indicating source IP address.
This is one IP address string.
This is optional, indicating source port.
This is one number, ranging from 1 to 65535.
This is optional, indicating virtual system id.
This is one number, ranging from 0 to 254.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 10 network
115