Dbfake Modify - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Command
Function
Command Format
Parameter
Description
22 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
tcp|6|udp|17
icmp|1
sport
<port1>
dport
<port2>
type
<number>

dbfake modify

This command is used to modify one virtual TCP/UDP packet rule.
dbfake modify id <number1> dev <string> smac <macaddres
s1> dmac <macaddress2> sip <ipaddress1> dip <ipaddress2>
ipproto [<tcp|6|udp|17> sport <port1> dport <port2>]|[<ic
mp|1> type <number2>]
Parameter
modify
id
<number1>
dev
<string>
smac
<macaddress1>
dmac
<macaddress2>
sip
<ipaddress1>
dip
<ipaddress2>
ipproto
Description
This specifies the protocol type of packet.
Both tcp and 6 indicate TCP protocol and both
udp AND 17 indicate UDP protocol.
This specifies the protocol type of packet.
Both icmp and 1 indicate ICMP protocol.
This specifies source port of TCP or UDP
packet.
This is one digital string, in range of 0-65535.
This specifies destination port of TCP or UDP
packet.
This is one digital string, in range of 0-65535.
This sets type of ICMP packet.
This is one digital number, which shows type
of ICMP packet.
Description
This modifies one virtual TCP/UDP packet rule.
This specifies the ID of packet to be modified.
This is one number, indicating packet ID.
This specifies interface name.
This is one string, which is the name of
interface, such as eth0.
This sets source mac address.
This is one standard MAC address string.
This is destination mac address.
This is one standard MAC address string.
This specifies source IP address.
This is one standard IP address string.
This specifies destination IP address.
This is one standard IP address string.
This specifies the type of transport layer
protocol.