Alarmnotice Modify Netbios - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Example
Command
Function
Command Format
Parameter
Description
Example
88 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
on|off
username
<string2>
password
<string3>
To change mail1 to need authentication and set authentication
username/password to user/user, execute the following command:
# alarmnotice modify mail name mail1 auth on username
user password user

alarmnotice modify netbios

This command is used to modify one netbios alarm.
alarmnotice modify <netbios> name <string1> hostname
<string2>[ipaddr <ipaddress>]
Parameter
modify
<netbios>
name
<string1>
hostname
<string2>
ipaddr
<ipaddress>
To modify IP address of the host receiving netbios1 alarm to
192.168.1.8, execute the following command:
# alarmnotice modify netbios name netbios1 hostname
host1 ipaddr 192.168.1.8
Description
Off indicates authentication is not needed and
when selecting this option, it doesn't need to
set the following parameters; on indicates
authentication is needed.
This is the username of authentication on
mail server.
This is a string, indicating username.
This is the password of authentication on mail
server.
This is a string, indicating user password.
Description
This command is used to modify one netbios
alarm.
This indicates the alarming mode is netbios
alarm.
This specifies the name of alarm to be
modified.
This is a string, indicating the name of alarm.
This modifies the name of host receiving
alarm messages.
This is a string, indicating the name of host.
This modifies the IP address of host receiving
alarm messages.
This is one string, indicating IP address, in
format of 192.168.83.6.