Zte ZXR10 8900 Series Command Manual page 142

ZXR10 8900 Series Command Manual (FW Volume)
Command Format
Parameter
Description
Command
Illustration
126 Confidential and Proprietary Information of ZTE CORPORATION
service add name
net|tosids|auth|ntp|update|dhcp|rip|l2tp|pptp|webui
|ipsecvpn|sdmi > area <string1><addressid <number1>|
addressname <string2>>[vsid<number2>]
Parameter
add
name
gui
snmp
ssh
monitor
ping
telnet
tosids
auth
ntp
update
dhcp
rip
l2tp
pptp
webui
ipsecvpn
sdmi
area
<string1><
addressid
<number1>
addressname
<string2><
vsid
<number2>
Parameters addressid and addressname can be used at the same
time. However, it must be confirmed that the objects correspond-
< gui|snmp|ssh|monitor|ping|tel
Description
This command is used to add one open
service rule.
This selects the name of service opened by
GW.
This is to enable GUI service.
This is to enable SNMP service.
This is to enable SSH service.
This is to enable monitor service.
This is to enable PING service.
This is to enable TELNET service.
This is to enable IDS service.
This is to enable authentication service.
This is to enable NTP service.
upgrade
This is to enable dynamic host configuration
service.
This is to enable RIP service.
This is to enable L2TP service.
This is to enable PPTP service.
This is to manage FW through WEBUI.
It is to enable services needed for establishing
IPSEC tunnel.
It is to enable security management service.
It allows to manage intrusion prevention
device through military security management
platform.
It selects the area from which service request
is sent. The area must be selected from
existing ones.
This is one string.
It sets ID for permitted address object.
This is one number.
It sets name for permitted address object.
It is a string. It must be a preset host, subnet
or scope address object.
This is id of virtual system.
This is one number.