Example
Command
Function
Command Format
Example
Command
Function
Command Format
Example
Command
Function
Command Format
Parameter
Description
To delete one NAT policy whose ID is 8144, execute the following
command:
# policy delete id 8144
policy show
This command is used to show NAT policies.
policy show
To show all address translation policies in FW, execute the following
command:
# policy show
policy clean
This command is used to clear NAT policies.
policy clean
To clear all address translation policies in FW, execute the following
command:
# policy clean
policy move
This command is used to move NAT policy. NAT policy conforms
to sequential matching principle. By moving NAT policy, matching
priority of policy can be changed.
policy move <number1>[<before <number2>|after <number
3>]
Parameter
<number1>
<number2>
<numbe3>
Confidential and Proprietary Information of ZTE CORPORATION
Description
This is one number, which is the ID of NAT
policy to be moved.
This is one number, which is the ID of policy.
Tips:
Values of parameters before and after cannot
be set at the same time.
This is one number, which is the ID of policy.
Tips:
Values of parameters before and after cannot
be set at the same time.
Chapter 9 policy (nat)
103