Server Delete; Server Clean - Zte ZXR10 8900 Series Command Manual

Example
Command
Function
Command Format
Parameter
Description
Command
Illustration
Example
Command
Function
Command Format
Example
Parameter
oldname
<string1>
newname
<string2>
To rename server server1 to server2, execute the following com-
mand:
# server rename oldname server1 newname server2

server delete

This command is used to delete one server.
server delete [id <number>][name <string>]
Parameter
delete
id
<number>
name
<string>
To delete server, it is available to delete the server according to
server name, server id or both. However, in case server id and
server name are inconsistent, server name shall apply.
When no parameter is given, the server not quoted by policy is
deleted.
To delete server1, execute the following command:
# server delete name server1

server clean

This command is used to delete all servers not quoted by policy.
server clean
To clear all unquoted servers in FW system, execute the following
command:
# server clean
Confidential and Proprietary Information of ZTE CORPORATION
Description
This specifies the name of server to be
renamed.
This is one string, indicating the name of
server (the server name has been defined).
This specifies new name for one server.
This is one string, indicating new name of the
server.
Description
This deletes one server.
This specifies ID of the server to be deleted.
This is one number, indicating ID of server.
This specifies the name of server to be
deleted.
This is one string, indicating name of the
server.
Chapter 4 define
53