Uptime; Version - Zte ZXR10 8900 Series Command Manual

Command
Illustration
Example
Command
Function
Command Format
Example
Command
Function
Command Format
Example
Parameter
filename
<string1>
serip
<ipaddress>
sysdisk
< normal >
ftp
yes
ftp-user
<sting2>
frp-password
<sting3>
Update lasts for about 10 minutes.
not conduct any operations to FW and especially avoid pressing
CTRL+C.
To update system through TFTP server, execute the following com-
mand:
# update filename 3.3.002.012_upt serip 192.168.1.4
sysdisk normal

uptime

This command is used to show running uptime after system boots
up.

uptime

#uptime UP 01:28

version

This command is used to show system version information.

version

# version Topsec Operating System tos_3.3.001.001.1
Confidential and Proprietary Information of ZTE CORPORATION
Description
This is the filename of update packet.
This is one string, which is name of update
packet.
This is IP address of update server.
This is one IP address string, in format of
0.0.0.0.
This is system to be updated.
This is system running normally.
Update through FTP server. Without this
parameter, it indicates update through TFTP
server.
This confirms to update through FTP server.
This is the name of user on FTP server.
This is one username string.
This is user password on FTP server,
corresponding to FTP username.
This is a password string.
Please wait patiently.
Chapter 13 system
Do
159