Zte ZXR10 8900 Series Command Manual page 113

Parameter
<dst_addr1>
orig_sport
<sport_id>
orig_service
<ser_id>
trans_src
<src_addr2>
trans_dst
Confidential and Proprietary Information of ZTE CORPORATION
Description
This is one string and source object name of
original packet is input here.
Tips:
1. This parameter must be one predefi
ned address object name.
2. Multiple address
input at the same time, in format of
'test1 test2'. As for multiple address
objects, space is used between each
two and all address object names are
quoted with single quotes.
This sets source port of original packet.
This is one string and source port name of
original packet is input here.
Tips:
1. This parameter must be one predefi
ned service resource.
2. Multiple service resources can be input
at the same time, in format of 'ser
ver1 server2'.
ice resources, space is used between
each two and all address object names
are quoted with single quotes.
This sets service resource of original packet.
This is one string and service resource name
of original packet is input here.
Tips:
1. This parameter must be one predefi
ned service resource.
2. Multiple service resources can be input
at the same time, in format of 'ser
ver1 server2'.
ice resources, space is used between
each two and all address object names
are quoted with single quotes.
This sets source object after translation.
This is one string and source object name
after translation is input here.
Tips:
1. This parameter must be one predefi
ned address object name or attribute
name.
2. Only one object can be input here.
3. This parameter is necessary when
adding source address translation
policy.
This sets destination object after translation.
Chapter 9 policy (nat)
objects can be
As for multiple serv
As for multiple serv
97