Faillock Show; Managermaxlogin; Managermaxlogin Set Maxnum; Managermaxlogin Show - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Parameter
Description
Example
Command
Function
Command Format
Example
Command
Function
Command Format
Parameter
Description
Example
Command
Function
Command Format
Example
144 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
<number>
To set authentication faillock time, execute the following com-
mand:
# faillock set time 60

faillock show

This command is used to show authentication faillock time.
faillock show
To show authentication faillock time, execute the following com-
mand:
# faillock show The auth fail lock_time is:60

managermaxlogin

This set of commands is used to set max concurrent management
site-related parameter.

managermaxlogin set maxnum

This command is used to set max concurrent management site-
related parameter.
managermaxlogin set maxnum<number>
Parameter
<number>
To set max concurrent management sites to 16, execute the fol-
lowing command:
# managermaxlogin set maxnum 16

managermaxlogin show

This command is used to show max concurrent management site-
related parameter.
managermaxlogin show
To show max concurrent location of manager, execute the following
command:
# managermaxlogin show The max location of manager is:16
Description
This is one number, which is faillock time, in
range of 60-3600, in seconds.
Description
This is max concurrent management
site-related parameter, in range of 1-32.