Managehost Show; Managesubnet; Managesubnet Add - Zte ZXR10 8900 Series Command Manual

Command
Function
Command Format
Command
Function
Command Format
Parameter
Description
Example

managehost show

This command is used to show all SNMP manage hosts.
managehost show

managesubnet

This set of commands is used to configure and manage SNMP man-
age subnets.

managesubnet add

This command is used to add one SNMP manage subnet.
managesubnet add name <string1> subnet <string2> comm
unity <string3>
Parameter
add
name
<string1>
hostip
<ipaddress>
community
<string2>
To add one SNMP manage subnet with subnet name to be man-
age_subnet1, subnet address to be 192.168.83.0, subnet mask to
Confidential and Proprietary Information of ZTE CORPORATION
Description
This adds one SNMP manage subnet.
This specifies the name of SNMP manage
subnet.
This is one string, which is the name of SNMP
manage subnet to be added.
This specifies the address of SNMP manage
subnet.
This is one standard IP address string, which
is IP address of manage host to be added.
This specifies community name with which
SNMP manage subnet accesses FW.
Tips:
1. SNMP V1/V2 supports community
name authentication scheme. SNMP
packets which don't match community
name authorized
dropped.
2. At present, system only supports
manage subnet
accessing and doesn't support setting
operation.
This is one string, which is the community
name.
Chapter 12 snmp
by FW will be
read mode for
133