Server Modify - Zte ZXR10 8900 Series Command Manual

Parameter
port
<number>
shared_sceret
<string3>
server_dn
<string4>
1. If the type of local authentication is selected, it also needs to
Command
Illustration add corresponding username in local authentication database.
2. Each servr has default authentication default. The default au-
thentication port of RADIUS server is 1812, that of TACACS
server is 49, that of LDAP server is 389, that of domain au-
thentication server is 389, and that of SecurID server is 5050.
To add one Radius authentication server, with server name to be
Example
RADIUS, authentication type to be radius, server address to be
192.168.83.231, server port to be 1812, shared key to be topsec
and keepalive timeout to be 100s, execute the following command:
# server add name radius protocol radius timeout 100
ip_address 192.168.83.231 port 1812 shared_sceret topsec
To add and start one OTP authentication server with keepalive
timeout to be 100s, execute the following command:
# server add name otp protocol local timeout 100

server modify

This command is used to modify information of authentication
Command
Function server.
Description
This specifies service port of authentication
server.
Tips:
This parameter must be set for authentications
of RADIUS type, TACACS type, SecurID type,
LDAP type and domain type; as for other
types of authentications, this parameter
doesn't need to be set.
This is one number, in range of 0-65535.
This specifies shared key.
Tips:
This parameter must be set for authentications
of RADIUS type, TACACS type, LDAP type
and domain type; as for other types of
authentications, this parameter doesn't need
to be set.
This is one string, which is the shared key of
authentication server.
This sets server domain name.
Tips:
This parameter must be set for authentications
of LDAP type and domain type; as for other
tyes of authentications, this parameter
doesn't need to be set.
This is one string. For example, if the domain
name of server is www.topsec.com.cn,
the input format of this parameter is
"dc=topsec,dc=com,dc=cn".
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 authentication
13