Start; Stop; Traphost; Traphost Add - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Command
Function
Command Format
Command
Function
Command Format
Command
Function
Command Format
Parameter
Description
Command
Illustration
Example
136 Confidential and Proprietary Information of ZTE CORPORATION

start

This command is used to enable SNMP Agent.

start

stop

This command is used to disable SNMP Agent.

stop

traphost

This set of commands is used to configure trap host to receive
SNMP Trap messages sent from FW. When Trap receive function is
enabled on manage host, manage host and trap host can be one
host.

traphost add

This command is used to add one trap host.
traphost add name <string> hostip <ipaddress>
Parameter
add
name
<string>
hostip
<ipaddress>
When Trap receive function is enabled on manage host, manage
host and trap host can be one host.
To add one trap host with name to be trap_host1 and IP address
to be 192.168.83.223, execute the following command:
# traphost add name trap_host1 hostip 192.168.83.223
Description
This adds one trap host.
This specifies the name of trap host.
This is one string, which is the name of trap
host to be added.
This specifies IP address of trap host.
This is one standard IP address string, which
is IP address of trap host to be added.