Ping; Probe-Package; Probe-Package Set - Zte ZXR10 8900 Series Command Manual

Command
Function
Command Format
Parameter
Description
Example
Command
Function
Command Format
*:*
*:*

ping

This command is used to authenticate connection between FW ser-
vice card and host or network device.
ping <ipaddress>[interface <string>][count <number1>][size
<number2>]
Parameter

ping

<ipaddress>
interface
<string>
count
<number1>
size
<number2>
To send 100 packets to authenticate connection between FW and
host 10.10.10.22, execute the following command:
# ping 10.10.10.22 count 100

probe-package

This set of commands is used to set the number of probe packets
sent from FW to server in virtual server.

probe-package set

This command is used to set the number of probe packets sent to
server in virtual server.
probe-package set <number>
Confidential and Proprietary Information of ZTE CORPORATION
LISTEN tcp
LISTEN
Description
This authenticates connection between FW
and host or network device.
This is one IP address string, in format of
0.0.0.0.
This is the name of interface through which
packets are sent out.
This is one string, indicating physical interface
name.
This sets the number of sent ping packets.
This is one number, indicating the number of
ping packets.
This sets the byte length of sent ping packet.
This is one number, in bytes, in rage of
0-65492.
Chapter 13 system
0 0 *:4005
151