Webui; Webui Cert; Webui Show; Webui Idle-Timeout - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Command
Function
Command Format
Parameter
Description
Command
Function
Command Format
Command
Illustration
Command
Function
Command Format
Parameter
Description
Example
Command
Function
160 Confidential and Proprietary Information of ZTE CORPORATION

webui

This set of commands is used to set WEBUI-related parameter.

webui cert

This command is used to restore WEBUI system root certificate.
webui cert <restore>
Parameter
<restore>

webui show

This command is used to show WEBUI setting.
webui show
Here settings of WEBUI login timeout and authentication mode can
be shown.

webui idle-timeout

This command is used to set WEBUI timeout.
webui idle-timeout <number>
Parameter
<number>
To set WEBUI timeout time to 60 seconds, execute the following
command:
# webui idle-timeout 60

webui max-client

This command is used to set the max number of users that log
into WEBUI system at the same time.
Description
This restores root certificate.
Description
This is an interval, in range of 30-3600, in
seconds. As for number 0, it indicates WEBUI
will never timeout.