ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
Step Command
1
ZXR10(config)#
protect-instance <<0-16>
2
ZXR10(config)#
protect-instance
Example
Step Command
1
ZXR10(config)#
{( preforward <1-600>[ preup <0-500>])| (role
{master |transit|zess-master|zess-transit}
2
ZXR10(config)#
major-level
Parameter
< 1-4094>
162
Confidential and Proprietary Information of ZTE CORPORATION
Configuring ZESR/ZESR+
Configuring ZESR Area Protection
Instance
zesr ctrl-vlan <1-4094>
no zesr ctrl-vlan <1-4094>
ZESR protection instance is same as STP. Service vlan is put into
protection instance, so generally enabling STP to cooperate with
ZESR. Control vlan should use vlan except service and shouldn't
conflict with service and network management. Note that pvid
of the port shouldn't be selected as control vlan. Outside port
shouldn't be put into control vlan.
1. This example shows how to configure control vlan as 4000 pro-
tection instance as 1.
ZXR10(config)# zesr ctrl-vlan 4000 protect-instance 1
2. This example shows how to delete control vlan as 4000 pro-
tection instance
ZXR10(config)# no zesr ctrl-vlan 4000 protect-instance
Configuring Major-level Ring ZESR
To configure ZESR/ZESR+ on major-level ring , use the following
commands. Major-level ring is the highest level ring, others are
access rings.
zesr ctrl-vlan < 1-4094> major-level
no zesr ctrl-vlan < 1-4094>
Parameter Description:
Description
Area control vlan, indicating zesr area
Function
<1-4094> area control
vlan, indicates zesr area, <
0-16>the protected instance
ID ,samed as stp instance
<1-4094> area control vlan,
indicates zesr area
Function
This configures major-level
ring ZESR.
This cancels the configuration
of major-level ring ZESR.