Subnet Rename; Subnet Delete - Zte ZXR10 8900 Series Command Manual

Example
Command
Function
Command Format
Parameter
Description
Example
Command
Function
Command Format
Parameter
Description
Command
Illustration
Example
To modify IP address of subnet1 to 192.168.20.0, execute the fol-
lowing command:
# subnet modify name subnet1 ipaddr 192.168.20.0

subnet rename

This command is used to rename one subnet.
subnet rename oldname <string1> newname <string2>
Parameter
rename
oldname
<string1>
newname
<string2>
To rename subnet1 to subnet2, execute the following command:
# subnet rename oldname subnet1 newname subnet2

subnet delete

This command is used to delete one subnet.
subnet delete [id <number>][name <string>]
Parameter
delete
id
<number>
name
<string>
To delete one subnet, it is available to delete the subnet according
to subnet name, subnet id or both. However, in case subnet id and
subnet name are inconsistent, subnet name shall apply.
When no parameter is given, the subnet not quoted by policy is
deleted.
To delete subnet1, execute the following command:
Confidential and Proprietary Information of ZTE CORPORATION
Description
This renames one subnet.
This specifies the name of subnet to be
renamed.
This is one string, indicating the name of
subnet (the subnet name has been defined).
This specifies new name for the subnet.
This is one string, indicating new name of the
subnet.
Description
This deletes one subnet.
This specifies ID of the subnet to be deleted.
This is one number, indicating ID of subnet.
This specifies the name of subnet to be
deleted.
This is one string, indicating name of the
subnet.
Chapter 4 define
59