Zte ZXR10 8900 Series Command Manual page 86

ZXR10 8900 Series Command Manual (FW Volume)
70 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
dstvlan
<string4>
src
<string5>
dst
<string6>
service
<string7>
schedule
<string8>
sport
<string9>
orig_dst
<string10>
permanent
on|off
Description
This sets destination VLAN.
This is one string, indicating preset vlan
number.
This is source address.
This is one string, indicating preset address
name. Multiple address names can be input
and space is used between each two address
names and all address names are quoted with
single quotes, such as 'aa ll'.
This is destination address.
This is one string, indicating preset address
name. Multiple address names can be input
and space is used between each two address
names and all address names are quoted with
single quotes, such as 'aa ll'.
This sets service resource.
This is one string. It must be one or
more names of system default services or
customized services. As for multiple service
names, space is used between each two
service names and all service names are
quoted with single quotes, such as 'IP ICMP'.
The case of names must be identical with
that defined by system, such as 'IP'. To
view service resources, execute command
ZXR10#define service show default.
This selects time resource, which must be
defined in previous define module.
This is name of object.
This specifies service resource on source port.
This is one string, which must be
system-predefined service resource name.
This specifies destination address before NAT.
This is one string, which must be
system-predefined address name.
This is optional. switch of long connection.
It is disabled by default, which means
the connection is an common connection.
In usual cases, FW disconnects one
connection if communication on it is idle
for a period for improving security and
releasing communication resources. However
connection for some applications requires
long-time holding, even if the connection
is in idle state. For example, ATM must
hold connection with server at processing
center, so this connection must be set to long
connection.
On/off, indicating long connection and
common connection.