Service Clean - Zte ZXR10 8900 Series Command Manual

Parameter
Description
Command
Illustration
Example
Command
Function
Command Format
Parameter
show
name
gui
snmp
ssh
monitor
ping
telnet
tosids
auth
ntp
update
dhcp
rip
l2tp
pptp
webui
ipsecvpn
sslvpn
When type is selected, the setting of specified service type is
shown; when type is not selected, all rules are shown.
To show all WEBUI service open rules, execute the following com-
mand:
# service show name webui

service clean

This command is used to clear all service rules.
service clean
Confidential and Proprietary Information of ZTE CORPORATION
Description
This shows one open service rule.
This selects name of the service to be viewed.
This is to enable GUI service.
This is to enable SNMP service.
This is to enable SSH service.
This is to enable monitor service.
This is to enable PING service.
This is to enable TELNET service.
This is to enable IDS service.
This is to enable authentication service.
This is to enable NTP service.
upgrade
This is to enable dynamic host configuration
service.
This is to enable RIP service.
This is to enable L2TP service.
This is to enable PPTP service.
This is to manage FW through WEBUI.
It is to enable services needed for establishing
IPSEC tunnel.
It is to enable services needed for establishing
SSL connection.
Chapter 11 pf
129