Server; Server Add - Zte ZXR10 8900 Series Command Manual

Command
Function
Command Format
Parameter
Description
Command
Illustration
Example

server

User can add, modify or modify and delete server in FW server
management. Server here is mainly used for FW load balancing
function.

server add

This command is used to add one server.
server add name <string1> host <string2>[weight<number1
>][probe <none|host|service>][port <number2>]
Parameter
add
name
<string1>
host
<string2>
weight
<number1>
probe
none|host|service
port
<number2>
With detection, working status of server can be found, thus avoid-
ing sending traffics to this server when the server is down or ser-
vices are abnormal, which makes services requested by user fail to
be responded. Two detection modes are available: host detection
and service detection. Host detection is to verify if server is online
through timely monitoring, which is realized by executing com-
mand ping. Service detection is to perform detection by selecting
corresponding port according to services provided by server and
establishing TCP connection, such as HTTP port 80, FTP port 21
and customized special port. Generally, service detection can re-
flect actual working status of server.
To add server1 with host to be host1 and weight to be 20, and set
service detection with probe port to be 8080, execute the following
command:
Confidential and Proprietary Information of ZTE CORPORATION
Description
This adds one service.
This sets name for the server.
This is one string, indicating name of the

server.

This sets the host used for server.
This is a string, indicating the name of host.
This sets weight of server.
This is one number, indicating weight of
server, ranging from 1 to 100.
This sets whether to perform detection to
server. There are three options: none, host
and service.
None indicates no detection; host indicates
host detection; service indicates service
detection. User needs to set detection port
when selecting service detection.
This sets detection port. Detection port needs
being set only when service detection is
selected.
This is one number, indicating port id.
Chapter 4 define
51