Parameter
Description
Example
Command
Function
Command Format
Parameter
Description
Example
Command
Function
Command Format
Parameter
add
<netbios>
name
<string1>
hostname
<string2>
ipaddr
<ipaddress>
To add netbios1 sent to host1 (IP: 192.168.1.6), execute the fol-
lowing command:
# alarmnotice add netbios name netbios1 hostname
host1 ipaddr 192.168.1.6
alarmnotice add console|snmp
This command is used to add one console or SNMP alarm.
alarmnotice add <console|snmp> name <string>
Parameter
console|snmp
<string>
To add console1 alarm, execute the following command:
# alarmnotice add console name console1
alarmnotice modify beep
This command is used to modify one beep alarm.
alarmnotice modify <beep> name <string>[<default>]|[freq
<number1> length <number2> reps <number3> delay <numb
er4>]
Confidential and Proprietary Information of ZTE CORPORATION
Description
This command is used to add one netbios
alarm.
This indicates the alarming mode is netbios
alarm.
This sets alarm name.
This is a string, indicating the name of alarm.
This sets the name of host receiving alarm
messages.
This is a string, indicating the name of host.
This sets the IP address of host receiving
alarm messages.
This is one string, indicating IP address, in
format of 192.168.83.6.
Description
This indicates it is console alarm or SNMP
alarm.
This is a string, indicating the name of alarm.
Chapter 8 log
85