Zte ZXR10 8900 Series Command Manual page 88

ZXR10 8900 Series Command Manual (FW Volume)
72 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
<string2>
srcvlan
<string3>
dstvlan
<string4>
src
<string5>
dst
<string6>
service
<string7>
schedule
<string8>
sport
<string9>
orig_dst
<string10>
dpi
<string11>
ar
Description
This is one string. It must be one or more
preset area name(s). As for multiple area
names, space is used between each two area
names and all addresses are quoted with
single quotes, such as 'area_gei_5/1'.
This sets source VLAN.
This is one string, indicating preset vlan
number.
This sets destination VLAN.
This is one string, indicating preset vlan
number.
This is source address.
This is one string, indicating preset address
name. Multiple address names can be input
and space is used between each two address
names and all address names are quoted with
single quotes, such as 'aa ll'.
This is destination address.
This is one string, indicating preset address
name. Multiple address names can be input
and space is used between each two address
names and all address names are quoted with
single quotes, such as 'aa ll'.
This sets service resource.
This is one string. It must be one or
more names of system default services or
customized services. As for multiple service
names, space is used between each two
service names and all service names are
quoted with single quotes, such as 'IP ICMP'.
The case of names must be identical with
that defined by system, such as 'IP'. To
view service resources, execute command
ZXR10#define service show default.
This selects time resource, which must be
defined in previous define module.
This is name of object.
This specifies service resource on source port.
This is one string, which must be
system-predefined service resource name.
This specifies destination address before NAT.
This is one string, which must be
system-predefined address name.
This sets DPI object.
This specifies object name, which must be
defined in previous DPI module and only one
name can be selected.
This sets application identification policy.