Command
Function
Command Format
Example
Command
Function
Command Format
Example
Command
Function
Command Format
Command
Illustration
Example
Command
Function
Command Format
Command
Illustration
Example
config reset
This command is used to load default configurations.
config reset
To load default configurations, execute the following command:
# config reset
config save
This command is used to save current system configuration.
config save
To save current system configuration, execute the following com-
mand:
# config save ** prompting save config success.
config show
This command is used to show configurations previously saved on
system.
config show
This shows configuration information after save operation. If any
configuration currently running in system is not saved, such infor-
mation will not be shown.
To show configurations previously saved on system, execute the
following command:
# config show
config show_running
This command is used to show current system configuration.
config show_running
This shows configuration information currently running in system
and it can also configuration information not saved yet. Command
show cannot show such information.
To show current system configuration, execute the following com-
mand:
# config show_running
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 13 system
147