Arp Detect; Attribute Show; Device_Hwaddr Show - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Command
Illustration
Example
Command
Function
Command Format
Parameter
Description
Example
Command
Function
Command Format
Command
Function
Command Format
106 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
<number2>
complete
total
ipaddress
With the parameters, ARP entries of corresponding types can be
displayed; without parameters, all ARP entries are displayed.
To show all ARP entries, execute the following command:
# arp show

arp detect

This command is used to conduct ARP detection according to spec-
ified IP address.
arp detect ip <ipaddress>
Parameter
<ipaddress>
To detect ARP information of 192.168.83.22, execute the following
command:
# arp detect 192.168.83.22

attribute show

This command is used to show all attributes.

attribute show

device_hwaddr show

This command is used to show hardware address information of
FW.

device_hwaddr show

Description
This is one number, which is the start page
number of arp table.
This shows all ARP entries.
This shows the total number of arp entries.
This is one standard IP address string. By
specifying IP address, it is available to view in
ARP table if there is any matched entry.
Description
This is IP address, which is the standard IP
address string.