ZXR10 8900 Series Command Manual (FW Volume)
Command
Function
Command Format
Command
Function
Command Format
Command
Function
Command Format
Example
Command
Function
Command Format
Parameter
Description
Example
154
Confidential and Proprietary Information of ZTE CORPORATION
save
This command is used to save system configuration.
save
service
This set of commands is used to configure system services.
service default
This command is used to restore default system service factory
configuration. All services are enabled by default.
service default
service status
This command is used to show running statuses of system ser-
vices.
service status
# service status system sshd start system telnetd start
system httpd start system monitord start dpi sip start
dpi pop3 start dpi http start dpi smtp start
show
This command is used to show configuration information saved in
system.
show [nostop]
Parameter
nostop
To show saved configurations, execute the following command:
# show
Description
This is to output all information in one screen.