Admininfo Add - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Command
Function
Command Format
Parameter
Description
Command
Illustration
Example
140 Confidential and Proprietary Information of ZTE CORPORATION

admininfo add

This command is used to add device manager information: name,
password and privilege information.
admininfo add
input manager's name:<string1>
new password:<string2>
re_enter password: <string2>
choose manager's privilege[audit| config|vs]:<audit|config
|vs>
input the comment[y/n]: <y|n>
input the comment: <string3>
Parameter
add
name
<string1>
password
<string2>
privilege
audit | config
comment
y|n
<string3>
When manager is of security management type, the command
prompt is "%" after accessing command line interface.
When manager is of security audit type, the command prompt is
"$" after accessing command line interface.
To add one device configuration manager, execute the following
command:
# admininfo add input manager's name:test new password:
re_enter password: choose manager's privilege[audit |
config | vs]:config input the comment[y/n]:y input the
comment:config_test_
user
It prompts manager is added successfully.
Add this manager successfully
Description
This adds device manager.
This is the name of device manager.
This is a name string.
This sets password.
This is a password string.
This sets privilege.
Manager has the following types: security
audit|security management.
Description
It specifies whether to give comment.
It the content of comment.