Range Rename - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Parameter
Description
Command
Illustration
Example
Command
Function
Command Format
Parameter
Description
44 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
modify
name
<string1>
ip1
<string2>
ip2
<string3>
except
<string4>
session
<number>
At the same moment, the total number of connections of all hosts
within the address range cannot exceed the number of max ses-
sions.
To modify range1 172.16.1.10—172.16.1.90, execute the follow-
ing command:
# range modify name range1 ip1 172.16.1.10 ip2
172.16.1.90

range rename

This command is used to rename address range.
range rename oldname <string1> newname <string2>
Parameter
rename
oldname
<string1>
newname
<string2>
Description
This modifies address range.
This sets name for address range to be
modified.
This is one string, indicating the name of
address range.
This sets a new start IP address for address
range.
This is one string, indicating IP address, in
format of 0.0.0.0.
This sets a new end IP address for address
range.
This is one string, indicating IP address, in
format of 0.0.0.0.
This sets a new except IP address in address
range.
This is one string, indicating IP address, in
format of 0.0.0.0.
This sets the number of session.
This is one number, indicating the number of
sessions.
Description
This renames address range.
This specifies the name of address range to
be renamed.
This is one string, indicating the name of
address range (the name of address range
has been defined).
This specifies new name for address range.
This is one string, indicating the new name
of address range.