Example
Command
Function
Command Format
Command
Function
Command Format
Command
Function
Command Format
Parameter
Description
Example
# telnet 192.168.1.23
telnetd
This set of commands is used to manage telnet service.
telnetd start
This command is used to enable Telnet service.
telnetd start
telnetd stop
This command is used to disable Telnet service.
telnetd stop
terminal
This set of commands is used to set terminal idle-timeout related
parameter.
terminal idle-timeout
This command is used to set terminal idle-timeout.
terminal idle-timeout < number >
Parameter
<number>
To set terminal idle-timeout to 60 seconds, execute the following
command:
# terminal idle-timeout 60
Confidential and Proprietary Information of ZTE CORPORATION
Description
This is one number, in range of 30-3600s. 0
indicates never time out.
Chapter 13 system
157