Service Modify - Zte ZXR10 8900 Series Command Manual

Example
Command
Function
Command Format
Parameter
Description
ing to addressid and addressname are unique, or services will fail
to be added.
To enable WEBUI service on interface gei_5/6, execute the follow-
ing command:
# service add name webui area area_gei5/6 addressname any

service modify

This command is used to modify one open service rule.
service modify id <number>[name < gui|snmp|ssh|monito
r|ping|telnet|tosids|auth|ntp|update|dhcp |rip | l2tp|pptp
|webui|ipsecvpn|sslvpn >][area <string1>][addressid <num
ber1>][addressname <string2>][vsid <number2>]
Parameter
modify
id
<number>
name
gui
snmp
ssh
monitor
ping
telnet
tosids
auth
ntp
update
dhcp
rip
l2tp
pptp
webui
ipsecvpn
sdmi
Confidential and Proprietary Information of ZTE CORPORATION
Description
This modifies one open service rule.
This specifies ID for the rule.
This is a number and must be the id of a rule
that has been added.
This selects the name of service opened by
GW.
This is to enable GUI service.
This is to enable SNMP service.
This is to enable SSH service.
This is to enable monitor service.
This is to enable PING service.
This is to enable TELNET service.
This is to enable IDS service.
This is to enable authentication service.
This is to enable NTP service.
upgrade
This is to enable dynamic host configuration
service.
This is to enable RIP service.
This is to enable L2TP service.
This is to enable PPTP service.
This is to manage FW through WEBUI.
It is to enable services needed for establishing
IPSEC tunnel.
It is to enable security management service.
It allows to manage intrusion prevention
device through military security management
platform.
Chapter 11 pf
127