Localdb Modify - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Example
Command
Function
Command Format
Command
Illustration
Example
8 Confidential and Proprietary Information of ZTE CORPORATION
6. Interface prompts "Input the comment[y/n]:", asking user to
input comments.
7. By inputting "y" and pressing Enter button, interface prompts
"Input the comment:". After inputting comments and pressing
Enter button, interface prompts "Add this user successfully".
It indicates user is added successfully. By inputting "n" and
pressing Enter button, interface prompts "Add this user suc-
cessfully". It indicates user is added successfully. If space is
wrongly input, the inputting fails.
To add one local authentication user with username to be test,
password to be 11111111, user type to be common and comment
to be "common user test", execute the following command:
# localdb add Input user's name:test New
password:11111111 (password is invisible in application)
Re_enter password:11111111 (password is invisible in
application) Choose user's type[common]:common Input
the comment[y/n]:y Input the comment:common user test
Add this user successfully

localdb modify

This command is used to modify the information of local authen-
tication user.
localdb modify
1. Username and user type together identify one user informa-
tion. Therefore, it mustn't modify username and user type.
2. Information of local authentication user can only be modified
by way of computer interaction. The detailed procedures are
as follow:
i. Input localdb modify and press Enter button.
ii. Interface prompts "Input manager's name:", input name of
user to be modified and press Enter button.
iii. Interface prompts "Modify the password[y/n]:". For mod-
ifying user password, enter "y", press Enter button, input
new password, confirm the password, and press Enter but-
ton to turn to step 4; by inputting "n" and pressing Enter
button, it turns to step (d).
iv. Interface prompts "Choose user's type[common]:". Input
the type of this user. User type is selected from the speci-
fied parameters. If it is wrongly input, system will prompt
"Usertype choosed should be [common]" and modification
fails.
v. Interface prompts "Modify the comment[y/n]:". For modi-
fying comment, enter "y", press Enter button, input com-
ment according to requirements (input "none" to clear com-
ment) and press Enter button; by inputting "n" and press-
ing Enter button, comment will not be modified.
To modify password of local authenticated user "test" to 22222222,
execute the following command: