Host Rename; Host Delete - Zte ZXR10 8900 Series Command Manual

Example
Command
Function
Command Format
Parameter
Description
Example
Command
Function
Parameter
<string2>
macaddr
<macaddress>
session
<number1>
halfsession
<number2>
To modify IP address of host1 to 192.168.1.20, execute the fol-
lowing command:
# host modify name host1 ipaddr 192.168.1.20

host rename

This command is used to rename one host.
host rename oldname <string1> newname <string2>
Parameter
rename
oldname
<string1>
newname
<string2>
To rename host1 to host2, execute the following command:
# host rename oldname host1 newname host2

host delete

This command is used to delete one host.
Confidential and Proprietary Information of ZTE CORPORATION
Description
This is one string, indicating IP address, in
format of 192.168.1.6. It can be one or more
IP addresses. As for multiple IP addresses,
space is used between each two IP addresses
and all addresses are quoted with single
quotes.
This specifies one new MAC address.
This is one string, indicating MAC address, in
format of 00:00:00:00:00:00.
This specifies the new number of max
sessions.
This is one number, indicating the number of
sessions on host.
This modifies the number of half-sessions.
This is one number, indicating the number of
half-sessions on host.
Description
This renames one host.
This specifies the name of host to be renamed.
This is one string, indicating the name of host
(the host name has been defined).
This specifies new name for one host.
This is one string, indicating new name of the
host.
Chapter 4 define
41