Host Modify - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Command Format
Parameter
Description
Example
Command
Function
Command Format
Parameter
Description
40 Confidential and Proprietary Information of ZTE CORPORATION
host add <name <string1>>[ipaddr <string2>][macaddr
<macaddress>][session
2>]
Parameter
add
name
<string1>
ipaddr
<string2>
macaddr
<macaddress>
session
<number1>
halfsession
<number2>
To add host1 with its ip address to be 192.168.1.8, execute the
following command:
# host add name host1 ipaddr 192.168.1.8

host modify

This command is used to modify one host.
host modify name <string1>[ipaddr <string2>][macaddr
<macaddress>][session
2>]
Parameter
modify
name
<string1>
ipaddr
<number1>][halfsession
Description
This adds one host.
This sets name for the host to be added.
This is one string, indicating name of the host.
This sets IP address for the host.
This is one string, indicating IP address, in
format of 192.168.1.6. It can be one or more
IP addresses. As for multiple IP addresses,
space is used between each two IP addresses
and all addresses are quoted with single
quotes.
This sets MAC address for the host.
This is one string, indicating MAC address, in
format of 00:00:00:00:00:00.
This sets the number of session.
This is one number, indicating the number of
sessions on host.
This sets the number of half-sessions.
This is one number, indicating the number of
half-sessions on host.
<number1>][halfsession
Description
This modifies one host.
This specifies the name of host to be modified.
This is one string, indicating name of the host.
This specifies one new IP address.
<number
<number