Configuring Area Resource; Area Resource Configuration Overview - Zte ZXR10 8900 Series User Manual

7. Deleting all members in one address group.
Command
ZXR10_FW.define#group_address
cleanmember groupname <string>
Parameter Description:
Parameter
cleanmember
groupname
<string>
Example:
To delete all members in groupaddr1, execute the following
command:
ZXR10_FW.define # group_address cleanmember
groupame groupaddr1
8. Showing all address groups:
Command
ZXR10_FW.define#group_address
show

Configuring Area Resource

Area Resource Configuration
Overview
In FW area management, user can add, modify and delete one
area and set default access privilege for area as well. Access con-
trol rule uses area for access control. In case no access control rule
matches, ZXR10 8900 Series Switch FW service card will process
this packet according to the privilege of area where destination
interface locates.
Configuring Area Resource
1. Adding one area.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 Resource Management Configuration
Description
This deletes all members in one address group.
This specifies the name of address group, all of
whose members are to be deleted.
This is one string, indicating the name of
address group.
Function
This deletes all
members in one
address group.
Function
This shows all address
groups:
41