Ibm Proprinter X24E And Xl24E Quick Reference Guide; Print Mode Control - Genicom LA36 User Manual

Command Sets

IBM Proprinter X24E and XL24E Quick Reference Guide

Function
This section describes the printer commands for the IBM Proprinter X24E and XL24E
protocol. When there is a difference, it is identified by LA36N (X24E) and LA36W
(XL24E). Asterisks in the "Function" column indicate extended commands that are not
supported by the original printer.
Function

Print Mode Control

Double-strike (bold) printing on
Double-strike (bold) printing off
Emphasized (shaded) printing on
Emphasized (shaded) printing off
Single-line double-width characters on
Single-line double-width characters off
Double-width characters on/off
(on: n = 1, off: n = 0)
Double-height/double-width characters
n = 4, n = 0, m
1 2
m controls character height and line spacing:
3
m Height
3
0 Unchanged
1 Normal
2 Double
16 Unchanged
17 Normal
18 Double
32 Unchanged
33 Normal
34 Double
m controls character width:
4
m
Width
4
0 Unchanged
1 Normal
2 Double
Condensed characters on
Condensed and elite characters off
Subscript or superscript printing on
(subscript: n = 1, superscript: n = 0)
Subscript and superscript printing off
Underline on/off (on: n = 1, off: n = 0)
Overline on/off (on: n = 1, off: n = 0)
C-22
= 0, m = 0
1 2
Spacing
Unchanged
Unchanged
Unchanged
Single
Single
Single
Double
Double
Double
Command
Command
ESC G
ESC H
ESC E
ESC F
SO or ESC SO
DC4
ESC W (n)
ESC [ @ (n ) (n ) (m ) ... (m
1 2 1
SI or ESC SI
DC2
ESC S (n)
ESC T
ESC - (n)
ESC (n)
)
4