Standard Configurations; Base Configuration (For Table-Top Use) - Genicom Intelliprint ML450 Installation Manual

Standard Configurations

The LN45 or Intelliprint mL450 printer can be ordered in the following two standard configurations:

Base Configuration (for table-top use)

Memory: 64 Mbytes RAM Memory
Resolutions: 300 x 300 dpi and 600 x 600 dpi
Paper Input:
Feeder for paper, transparencies, envelopes, and other non-standard paper sizes
Paper Output: One 500-sheet face down tray
Interfaces: Bidirectional 1284 Parallel Port (Type-B); Ethernet 10/100BaseT Port
Printer Languages: Adobe PostScript 3 and PCL6
Finisher/Stapler
Power Connector
Sep 01
GENICOM LN45 and Intelliprint mL450 Installation Guide
Two 500-sheet universal paper trays and one 50-sheet Multi-Purpose Bypass
Output Tray
Full Sensor
Parallel Port
(integral)
AC Power
Input Connector
Genicom
Base Configuration (for table-top use)
Optional Network
Interface Ports
(RJ45, BNC,
RS-232C/422
Serial, etc.)
Ethernet 10Base-T Port
(integral)
Duplexer Connector
Finisher/Stapler Connector
High Capacity Feeder Connector
Publication No. GEG-99122
3