Printer Acoustical Feedbacks; Selecting Paper; Paper Specifications; Paper Thickness And Number Of Copies - Genicom LA36 User Manual

Printer Acoustical Feed-Backs
Except for paper handling and when the factory setting for beep is not changed, the printer
beeps in the following ways when you press a control panel button, as follows.
• A short beep indicates that the printer accepts your pressing or specification.
• A longer beep indicates that your specification is invalid.
• In a certain mode, a middle long beep indicates that the specified mode becomes active
and a short beep indicates the end of the mode.
• When the
Fault

Selecting Paper

The printer can handle either single sheets or continuous forms. Single sheets, also called
cut sheets, include envelopes and noncontinuous, multipart forms. Continuous forms
include labels and multipart forms fed into the printer using the forms tractors.
For best results, use paper that meets the specifications listed in the following table. (See
Appendix B, "Printer and Paper Specifications," for detailed specifications.) If you are
unsure of the suitability of a particular type of paper, try testing the paper or consult your
dealer.

Paper Specifications

Paper Size
Continuous
forms
Cut sheets

Paper Thickness and Number of Copies

Thickness
Copies
indicator lights, the printer also makes a longer beep.
LA36N
Width 102 to 267 mm (4 to 10.5 in) 102 to 420 mm (4 to 16.5 in)
Length 102 mm (4 in) or greater
Width 102 to 267 mm (4 to 10.5 in) 102 to 420 mm (4 to 16.5 in)
Length 76 to 364 mm (3 to 14.3 in)
Description
0.35 mm (0.014 in) maximum total thickness.
1 to 5 copies, including the original.
For carbon-interleaved paper, the carbon counts as a copy.
Paper Handling
LA36W
102 mm (4 in) or greater
76 to 420 mm (3 to 16.5 in)
2-7