Selecting The Paper Path - Genicom 4810 User Manual

Selecting the Paper Path
AK43A
REAR EXIT
This printer has a top exit paper path and a rear exit paper path.
The top path is used when forms or peel-off labels are printed and removed
from the printer individually.
The rear path is used when high volumes or unattended print Jobs are
printed.
When the top exit is closed, the paper will automatically seek the rear exit.
To switch to the top exit, push down on the ears of the top exit door as
shown below.
SIDE VIEW
PUSH HERE
/
\
OPENING THE TOP PAPER PATH DOOR
Top and Rear Paper Paths
Figure
1-19
IMPORTANT
1. Choose the paper path before allowing the paper to go past the upper
tractors.
2. The top cover
must
be closed for the paper to use either path.
1-22
User's Manual
Nov 93
AJ97A