Concluding Steps; Replacing The Onboard Sas Enabling Key; Preliminary Steps - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

14.5.2.3 Concluding steps

"Reassembling" on page 62
Ê
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê
"Enabling BitLocker functionality" on page 98
Ê

14.5.3 Replacing the onboard SAS enabling key

Upgrade and Repair Unit
(URU)
Tools: tool-less

14.5.3.1 Preliminary steps

"Disabling BitLocker functionality" on page 77
Ê
"Locating the defective server" on page 45
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 48
Ê
"Getting access to the component" on page 49
Ê
14.5.3.2 Replacing the onboard SAS enabling key
"Removing the onboard SAS enabling key" on page 360
Ê
"Installing the onboard SAS enabling key" on page 358
Ê
14.5.3.3 Concluding steps
"Reassembling" on page 62
Ê
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê
"Enabling BitLocker functionality" on page 98
Ê
TX2540 M1
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
361