Show Platform Layer4Op - Cisco Catalyst 3750-X Command Reference Manual

Appendix C Catalyst 3750-X and 3560-X Show Platform Commands

show platform layer4op

Use the show platform layer4op privileged EXEC command to display platform-dependent Layer 4
operator information.
Syntax Description acl
pacl [port-asic]
qos [port-asic]
and-or
map
or-and
vcu
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
OL-29704-01
show platform layer4op {acl | pacl [port-asic] | qos [port-asic]} {and-or | map | or-and | vcu}
Display access control list (ACL) Layer 4 operators information.
Display port ACL Layer 4 operators information. The keyword has this meaning:
• port-asic—(Optional) Port ASIC number.
Display quality of service (QoS) Layer 4 operators information. The keyword has
this meaning:
• port-asic—(Optional) QoS port ASIC number.
Display AND-OR registers information.
Display select map information.
Display OR-AND registers information.
Display value compare unit (VCU) register information.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show platform layer4op
C-21