Debug Matm Move Update - Cisco IE-3000-8TC Command Reference Manual

debug matm move update

debug matm move update
Use the debug matm move update privileged EXEC command to enable debugging of MAC
address-table move update message processing.
Syntax Description
This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines The undebug matm move update command is the same as the no debug matm move update command.
Related Commands Command
mac address-table
move update
transmit}
show debugging
show mac
address-table move
update
Cisco IE 3000 Switch Command Reference
B-20
debug matm move update
no debug matm move update
Modification
This command was introduced.
Description
Configures MAC address-table move update feature on the switch.
{receive |
Displays information about the types of debugging that are enabled.
Displays the MAC address-table move update information on the switch.
Appendix B IE 3000 Switch Debug Commands
OL-13019-01