Show Mls Qos Queue-Set - Cisco Catalyst 3560X-24P Command Reference Manual

show mls qos queue-set

show mls qos queue-set
Use the show mls qos queue-set user EXEC command to display quality of service (QoS) settings for
the egress queues.
Syntax Description qset-id
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(53)SE2
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.nway
Examples This is an example of output from the show mls qos queue-set command:
Switch> show mls qos queue-set
Queueset: 1
Queue
----------------------------------------------
buffers
threshold1:
threshold2:
reserved
maximum
Queueset: 2
Queue
----------------------------------------------
buffers
threshold1:
threshold2:
reserved
maximum
Catalyst 3750-X and 3560-X Switch Command Reference
2-716
show mls qos queue-set [qset-id] [ | {begin | exclude | include} expression]
(Optional) ID of the queue-set. Each port belongs to a queue-set, which defines
all the characteristics of the four egress queues per port. The range is 1 to 2.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
: 1 2
: 25 25
100 200
100 200
: 50 50
: 400 400
: 1 2
: 25 25
100 200
100 200
: 50 50
: 400 400
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
3 4
25 25
100 100
100 100
50 50
400 400
3 4
25 25
100 100
100 100
50 50
400 400
OL-21522-02