Show Env - Cisco Catalyst 2960 Command Reference Manual

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

show env

Use the show env user EXEC command to display fan, temperature, redundant power system (RPS)
availability, and power information for the switch.
Syntax Description
all
fan
power
rps
temperature
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(25)FX
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example of output from the show env all command:
Switch> show env all
FAN is OK
TEMPERATURE is OK
POWER is OK
RPS is AVAILABLE
This is an example of output from the show env fan command:
Switch> show env fan
FAN is OK
OL-8604-03
show env {all | fan | power | rps| temperature} [ | {begin | exclude | include} expression]
Display both fan and temperature environmental status.
Display the switch fan status.
Display the switch power status.
Display whether an RPS 300 Redundant Power System is connected to the switch.
Display the switch temperature status.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Catalyst 2960 Switch Command Reference
show env
2-439