link state group
Examples
This example shows how to configure the interfaces as upstream in group 2:
Switch# configure terminal
Switch(config)# interface range gigabitethernet1/1 - 2
Switch(config-if-range)# link state group 2 downstream
Switch(config-if-range)# end
Switch(config-if)# end
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands
Command
link state track
show link state group
show running-config
Cisco IE 3000 Switch Command Reference
2-180
Description
Enables a link-state group.
Displays the link-state group information.
Displays the current operating configuration. For syntax information, select
Cisco IOS Configuration Fundamentals Command Reference for
Release 12.2 > Cisco IOS File Management Commands > Configuration
File Commands.
Chapter 2
IE 3000 Switch Cisco IOS Commands
OL-13019-01