Show Igmp Group - D-Link xStack Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin#show igmp
Command: show igmp
IGMP Interface Configurations
Interface IP Address/Netmask
------------ ------------------
System 10.90.90.90/8
Total Entries: 1
DGS-3120-24TC:admin#
39-3

show igmp group

Description
This command is used to display the switch's IGMP group table.
Format
show igmp group {group <group> | ipif <ipif_name 12>}
Parameters
group - (Optional) Specify the multicast group ID.
<group> - Enter the multicast group ID value here.
ipif - (Optional) Specify the IP interface name to be displayed
<ipif_name 12> - Enter the IP interface name, to be displayed, here. This name can be up to
12 characters long.
If no parameter is specified, the system will display all IGMP group tables.
Restrictions
None.
Example
To display the IGMP group table:
Ver- Query Maximum
sion Response ness
Time
---- ------ -------- ------- -------- --------
2 125 10
402
Robust- Last State
Member
Value Query
Interval
2 1 Enabled